Home> News> White paper appears when the barcode printer prints
February 06, 2023

White paper appears when the barcode printer prints

After changing the paper or carbon Ribbon of the barcode printer, it is easy to encounter paper skipping when printing with the barcode printer, and the position of the printed label is not correct. Now let's introduce the problems and solutions of white paper in barcode printers.

1. The Barcode Label paper is installed incorrectly. Please follow the steps in the accompanying quick installation guide to reinstall the barcode label paper

2. The position of the paper sensor is incorrect. Lift the print head, and you will see a paper detector where the paper passes through. The detector needs to be covered by the paper so that the barcode printer can correctly adapt to the size of the paper.

3. The setting of the barcode label paper is different from the actual size. In the "Paper" tab of the "Page Setup" of the software that edits the barcode label paper, reset it. It is recommended to use a ruler to measure the actual height of the barcode label paper before printing, and then set the label correctly.


White paper appears when the barcode printer prints


4. The paper sensor is dirty, clean the paper sensor with absolute alcohol, and turn off the power of the printer before cleaning. Re-operate "paper detection", press and hold the FEED button for 3 seconds in the standby mode, the 3 LED indicators will flash at the same time.

5. The gap between the barcode label paper is not standardized. When some label paper is processed, the size or interval of the produced label paper will be different due to the machine or the mold, so that the barcode printer cannot sense the label paper. size.

6. The bottom paper of the barcode label is too hot or the label paper is irregular. If the bottom paper is too thick or the label paper is irregular, the printer will not be able to sense the paper size.

7. Sensor failure. If the previous methods cannot be solved, there may be a problem with the paper sensor.

Jiangmen Hengyuan Label Technology Co.,Ltd established in 2003, located in Jiangmen City, GuangDong China.We are one of the leading manufacturer and supplier of label,specializing in R&D, production and sales of pre-printed /Blank paper material. Shipping Label.Printing Label.Custom Stickers,Jumbo Label Roll are our featured products.We export a lot to all over the world each month.For more details about the product, please contact us:
Tel :+86-750-3718439
Mobile Phone :+8613143352910
Email : hys@chinahypaper.com
Share to:

LET'S GET IN TOUCH

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send